Microcement Melbourne — Seamless Floors, Walls & Showers

Create seamless, contemporary surfaces with microcement — the grout-free alternative to tiles and polished concrete. Golden Line Rendering installs premium microcement systems across Melbourne homes and commercial spaces, from bathroom floors to feature walls, benchtops and staircases.

What Is Microcement?

Microcement is a polymer-modified cementitious coating applied by hand in layers just 2–3 mm thick. It bonds to almost any stable substrate — tiles, concrete, cement sheet, plasterboard — and cures into a continuous, seamless surface with the look of polished concrete but without the weight, joints or demolition.

Because it's applied over existing surfaces, microcement is ideal for renovations: a dated tiled bathroom can become a seamless, modern wet room without ripping out a single tile.

Where We Use Microcement in Melbourne Homes

• Bathrooms and showers — fully waterproof systems for walls and floors, with no grout lines to clean or regrout. Read our detailed guide: Can Microcement Be Used in Showers?
• Floors — durable, seamless floors for living areas, kitchens and hallways, over existing concrete, screed or tiles.
• Kitchen splashbacks and benchtops — heat-resistant, sealed surfaces with a refined concrete aesthetic.
• Feature walls — soft, cloudy texture that pairs beautifully with timber, stone and brass.
• Staircases and joinery — wrap treads, risers and built-in furniture for a continuous architectural look.

Finishes and Colours

Elf Decor microcement is available in a full spectrum of tinted colours — warm greys, bone whites, sand tones, deep charcoals — and three surface feels:

• Matte — soft and natural, the most popular choice for floors.
• Satin — a gentle sheen that lifts wall finishes and wet areas.
• Textured — additional grip for external areas and pool surrounds.

Every project is hand-trowelled, so each surface carries subtle, unrepeatable movement — no two microcement installations are alike.

Is Microcement Waterproof?

Microcement itself is water-resistant; full waterproofing comes from the system: a certified waterproofing membrane beneath, correctly detailed falls and junctions, and a two-coat polyurethane sealer over the surface. We install to Australian wet-area standards (AS 3740) and never shortcut the membrane — this is the difference between a shower that lasts two years and one that lasts twenty.

Microcement vs Tiles

• No grout — nothing to scrub, discolour or regrout.
• Seamless — one continuous surface makes small bathrooms feel larger.
• Faster renovations — applied over existing tiles, avoiding demolition, waste and days of labour.
• Warmer underfoot — compatible with underfloor heating.
• Repairable — worn sealer can be renewed without replacing the surface.

Why Choose Golden Line Rendering for Microcement?

As the exclusive Australian representative for Elf Decor, we install European microcement systems unavailable elsewhere in Australia — and we know them at manufacturer level, because we also train other applicators in their use. Our team is European-trained, specialises exclusively in decorative finishes, and handles everything from substrate assessment to final sealing in-house.

Visit our Highett showroom to see and touch full-size microcement samples before you decide, or order free samples delivered to your door.

Our Microcement Application Process

A typical bathroom or floor takes 4–6 days:

• Day 1: Substrate preparation, priming, and waterproofing (wet areas)
• Days 2–3: Base coats with reinforcing mesh
• Days 3–4: Two finish coats, hand-trowelled and sanded
• Days 5–6: Two-part sealer application and curing

Surfaces take light traffic after 24–48 hours and reach full cure in about a week.

Microcement Cost in Melbourne

Most Melbourne microcement projects fall between $250 and $450 per square metre installed, depending on:

• Surface type — floors and showers need more preparation and sealing than walls
• Substrate condition and levelling required
• Wet-area waterproofing requirements
• Total area — small bathrooms carry a higher per-metre rate than large floors

Microcement is comparable in cost to quality tiling once demolition and grout maintenance are factored in — and considerably faster. For exact pricing, we offer free on-site consultations.

Care and Maintenance

Clean with a damp mop or cloth and pH-neutral detergent — avoid bleach and abrasives. In showers, a quick squeegee after use keeps the sealer in top condition. High-traffic floors benefit from resealing every 5–8 years, a straightforward one-day job.

Melbourne Suburbs We Service

We install microcement throughout metropolitan Melbourne, including Toorak, South Yarra, Brighton and Bayside, Prahran, St Kilda, Richmond, Hawthorn, Carlton, Fitzroy, Camberwell, Kew, Malvern, Docklands and Southbank — and select regional Victorian projects.

Frequently Asked Questions

Can microcement be applied over tiles?

Yes — over stable, well-adhered tiles we prime and skim the surface, saving demolition entirely. Drummy or loose tiles are removed first.

Does microcement crack?

Correctly installed microcement is flexible and reinforced with mesh, so it doesn't crack on its own. Cracks only follow structural movement in the substrate, which we assess before quoting.

Is microcement slippery?

No more than large-format tiles. For bathroom floors and external areas we use texture and sealer combinations that meet slip-resistance needs.

Can it be used outdoors?

Yes — with UV-stable sealers, microcement suits alfresco areas, pool surrounds and facades.

How thick is microcement?

2–3 mm total, so it won't affect door clearances or floor levels in a renovation.

Ready for Seamless Surfaces?

Book a free consultation at your home or our Highett showroom. Call (03) 7302 0578 or request a quote.